Frequently Asked Questions - Hubsan H122D Quick Start Manual

Frequently Asked Questions

1. Aircraft and remote control are not pairing
(1) Check that the aircraft and remote control are both powered on.
(2) Turn off both the aircraft and remote control. Rebind the aircraft to the
remote control by following the rebind directions on page 1 of this guide.
2. No video on the screen or user is experiencing strong video
feed interference
(1) Check whether there are strong sources of wireless interference (i.e.
WIFI, electricity, radio tower frequencies, etc). If there are any, please
change your flight location.
(2) Rebind the copter to the transmitter, as the 5.8 and 2.4 frequencies
might be interfering with each other.
(3) Browse through the selection of available 5.8gHz frequencies to find a
clean channel.
3. Aircraft/video feed is shaking/shaky
(1) Check if the aircraft propellers are deformed or broken. Please replace
them.
(2) Check that all aircraft body screws are firmly in place.
(3) Check whether any motor shafts are broken. Motors must be replaced
if the shafts are broken.
4. Cannot take videos or pictures
(1) Check to see that the SD card is installed in the aircraft prior to
power on.
(2) Make sure the SD card is Class 10 or higher, contains 16GB or
32GB of storage and is formatted to FAT32.