Horizontal Calibration - Hubsan H122D X4 STORM User Manual

All illustrations are shown in Mode 2 (American hand)
2. Power the HS001 on by pushing the power switch up. Long press the display's
binding button (shown below) to allow the HS001 to enter binding mode. The
display will beep three times.
3．Connect the drone to its battery. While all units are in either binding or pairing
modes, please do not touch, press or move any of the transmitter joysticks,
buttons or keys. Doing so will cause the aircraft to drift or perform unstably during
flight. After binding is successful, the transmitter's binding status LED will be a
solid blue.

3.4.2 Horizontal calibration

Horizontal calibration is required when the aircraft drifts on the horizontal plane
during flight. When this happens, land the aircraft and disarm its motors. Follow
the below steps to do a horizontal/gyro calibration.
18