Frequently Asked Questions - Hubsan Zino Quick Start Manual

Frequently Asked Questions

1. Transmitter and aircraft are not pairing
Reinitialize the aircraft and transmitter.
2. Cannot arm motors
Make sure that you have completed compass calibration.
3. Weak or nonexistent GPS signal / few or no GPS satellites
Check the surrounding environment for sources of high frequently
signal interference.
4. The aircraft does not return to the home point
When the aircraft takes off, be sure that the aircraft has received 6 or
more satellites.
5. Aircraft / video feed is shaking / shaky
① Check if the aircraft propellers or motor shafts are deformed /
broken. Please replace if applicable.
② Check that all aircraft body screws are firmly in place.
6. Cannot take videos or pictures
① Check to see that the SD card is installed in the aircraft prior to
power on.
② Make sure the SD card is formatted correctly (Recommended SD
cards: SanDisk, Kingston, Samsung, U1 and 32GB or higher).
③ Check if the SD card storage is full.
Please read the operating instructions carefully before use!
● Never leave units unattended when charging
● Unplug the charging cable immediately after charging
● Propellers may cause injury
● This product is not a toy and is not suitable for children under
14 years of age
Product name: Zino
Product Standard Number: Q / HBS 001-2017
Vendor: Shenzhen Hubsan Technology Co., Ltd
Address: 13th Floor, Block C, Shenzhen Software Industrial Base,
Xuefu Road, Nanshan District, Shenzhen, Guangdong Province, China
Email: service@hubsan.com