Hs001 Key Functions; Installing The Tf - Hubsan H122D X4 STORM User Manual

Photo/Video mode
switch button
Record button
Main Menu
Binding/Clear
screen button
Speaker

2.2.3 HS001 key functions

No. Key/button/Switch
1
Power Switch
Photo/Video mode
2
switch button
3
Photo/Video button
4
Main Menu key
Binding/Clear
5
screen button
6
TF (Micro-SD) slot
7
Micro-USB port
8
Charging status LED
2.2.4 Installing the TF (Micro-SD) card
Insert the SD card in the TF card slot located on the display's right hand side. To eject the SD
card from the slot, push the Micro-SD inwards (it will pop out).
Function
Push up/ON to turn on the transmitter. Push down/OFF to turn off.
Photo/Video mode switch button
Short press to take photos/start and end video recordings.
Short press to enter the Main Menu. Use in conjunction with the +/-
keys to adjust screen brightness/contrast/chrominance/the 5.8GHz
frequency and to check firmware information.
Hold while powering the screen on to initiate a binding. Short press while
the screen is on to clear the screen; short press again to show content.
Insert an SD card into the LCD screen's slot to take and store photos
and video recordings.
Used for charging and for updating firmware (only when necessary).
While the screen is charging, the LED is a solid red. After charging is
complete, the LED turns solid green.
10
5.8 Antenna
Sunshade recess
LCD screen
Charging status LED