Hs001 Key Functions - Hubsan H122D X4 STORM User Manual

Table of Contents

Advertisement

Photo key
Video key
2.1.2 HT015 key functions
No.
Key/button/Switch
1
Throttle/Rudder stick
Elevator/Aileron stick
2
3
Power button
4
Binding mode
5
Arm/Disarm motors
6
Photo key
7
Video key
8
Headlight power toggle
9
Aileron trim
10
Transmitter status LED
11
Binding status LED
12
Clear Screen key
13
Acro mode
14
Sensitivity
Battery compartment
Function
Push the stick forward or backward and the quadcopter will ascend or
descend (respectively). Push the stick left or right and the quadcopter will
rotate counterclockwise or clockwise (respectively).
Push the stick forward or backward and the quadcopter will fly forwards or
backwards (respectively). Push the stick left or right and the quadcopter
will fly left or right (respectively).
Long press to power the screen on or off. The transmitter status LED will
turn solid upon power on.
Hold the Photo key while powering the transmitter on to enter binding mode.
Pull both joysticks down out and hold the position for 1.5 seconds.
Short press to take a photo.
Short press to start a video recording; short press again to end itt.
Note: Users cannot take pictures while recording video. Attempting to do so
will end any video recording in progress.
Short press to turn the headlight on; short press again to turn it off.
Short press to trim the Aileron
Provides information on the transmitter's status as well as power warnings.
Normally, the LED is solid.
Low power warning: the LED rapidly flashes and the transmitter will beep
continuously.
Not connected: the LED is blue, flashing slowly.
Connected: the LED is blue and upon connection will beep.
Short press to clear the screen; short press again to show content.
Short press on the throttle (you should feel and hear a click). The transmitter
will beep 3 times and enter Acro mode.
Short press on the non-throttle joystick (you should feel and hear a click).
Entering Expert mode: Two beeps indicate that the transmitter is in Expert
mode.
Exiting Expert mode: One beep indicates that the transmitter has exited
Expert mode.
08
Aileron trim

Advertisement

Table of Contents
loading

Table of Contents