Landing
Slowly and gently pull the throttle joystick down until the copter has completed its descent
on the ground. Simultaneously pull
the transmitter joysticks diagonally
down-out to disarm the motors (as
shown in the right figure). After all
motors have come to a complete
stop, release the joysticks.
3.3.4 Basic flight operation
Note: When flying the aircraft, be sure to slowly and firmly manage the controls. With every
joystick maneuver the aircraft will lose a little power, so be sure to use a little extra throttle
to keep the aircraft airborne.
The throttle controls the ascent and descent of the copter.
Mode 2 (American hand)
The rudder is used to control the aircraft's rotations.
Mode 2 (American hand)
Mode 1 (Japanese hand)
Mode 1 (Japanese hand)
14
Descend
Clockwise
rotation
Counterclockwise
rotation
Ascend