Installer Manual; Pinout Tables; 20-Pin Connector; Wiring Diagram - Gemini 933 Series Installation And Use Manual

INSTALLER MANUAL

5.0 - PINOUT TABLES

5.1 - 20-PIN CONNECTOR

POSITION WIRE FUNCTION
- 1 -
- 2 - System arming confirmation signal
- 3 - System disarming confirmation signal
- 4 -
- 5 - Positive/negative input - door switches
- 6 - Electronic key receptacle Input
- 7 - Electronic key receptacle ground
- 8 - LED negative output
- 9 - LED positive output
- 10 - Ignition
- 11 - CAN BUS signal (CAN-H)
- 12 - CAN BUS signal (CAN-L)
- 13 - Positive output - system armed (+A)
- 14 - External sensors negative input
- 15 - Bonnet switch negative input
Self-powered siren (lack of negative during alarm) or
- 16 -
optical pulse signals (Hazard)
- 17 - Comfort negative output
Additional siren or vehicle horn output (negative output
- 18 -
during alarm)
- 19 -
Input for self-learning and system arming/disarming by
- 20 -
turn indicators
WHITE-ORANGE wire must ALWAYS be connected if system is arms/disarms via the
!
5.2 - 8-PIN CONNECTOR
POSITION WIRE FUNCTION
- 1 - Ground
- 2 - Siren output
- 3 - Positive
- 4 - Turn indicators positive output
- 5 - Engine block
- 6 - Siren output
- 7 - Engine block
- 8 - Turn indicators positive output
PAGE 06 - INSTALLER MANUAL
WIRE COLOUR
-----
YELLOW-BLUE
GREEN-BLUE
-----
GREEN-BROWN
BLACK marked "G"
LIGHT BLUE-GREY
LIGHT BLUE
GREEN-BLACK
WHITE-BLACK
YELLOW-BLACK
-----
WHITE-ORANGE
turn indicators.
WIRE COLOUR
BLACK marked "M"
BLACK marked "R"
BLACK marked "H"
BLACK marked "H"
electrical connections,
disconnect the negative
!
battery terminal and re-
-----
ELECTRONIC KEY
-----
GREEN
BROWN
BLACK
RED
PINK
GREEN Door trigger positive/negative input
BLUE
LIGHT BLUE-GREY (CAN-H)
-----
Comfort output (negative)
Positive output - system armed (+A)
-----
ORANGE
-----
ORANGE

6.0 - WIRING DIAGRAM

Before carrying out
connect again after
completion.
Green
Brown
Red
Black
GREEN-BLACK
External sensors input
GREEN-BROWN
LIGHT BLUE (CAN-L)
CAN BUS signal
WHITE-BLACK
PINK
YELLOW-BLUE
GREEN-BLUE
Input for system operation
via vehicle door
lock motor unit
YELLO -BLACK W
Additional siren or
vehicle horn
GREEN
(negative output
during alarm)
BLUE
Self-powered siren output
(art. 7725, lack of negative
during alarm ) or
optical pulse signals (Hazard)
Connection
of 933 unit
with supplied
siren
8 7 6
4 3 2
BLACK marked "R"
15A
+
POSITIVE
Battery
BLACK marked "M"
GROUND
ORANGE
ORANGE
Turn indicators
BLACK marked "H"
BLACK marked "H"
8A
Engine block
MAX !
WHITE-ORANGE
Input for system operating
through vehicle turn indicators
OPTIONAL
Bonnet switch
+30
BLACK marked "G"
Ignition
INSTALLER MANUAL - PAGE 07
5
1