Table of Contents
Advertisement
INSTALLER MANUAL
4.0 - PINOUT TABLES
20-PIN CONNECTOR
POSITION
WIRE FUNCTION
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
Positive/negative input - door switches
- 6 -
DO NOT CONNECT
- 7 -
DO NOT CONNECT
- 8 -
LED negative output
- 9 -
LED positive output
- 10 -
Ignition
- 11 -
CAN BUS (CAN-H) signal
- 12 -
CAN BUS (CAN-L) signal
- 13 -
Positive output - system armed (+A)
- 14 -
Negative input - external sensors
- 15 -
Negative input - bonnet switch (for pairing purposes)
Optical pulse signals (Hazard)
- 16 -
Lock command (1.5 sec.* negative pulse when pressing
- 17 -
remote control button "1" or "3")
Unlock command (1.5 sec.* negative pulse when
- 18 -
pressing remote control button "2")
- 19 -
- 20 -
If "
feature is enabled (par. 8.0), lock/unlock pulse time will be 0.5 sec.
*
Double pulse unlock"
instead of 1.5 sec.
8-PIN CONNECTOR
POSITION
WIRE FUNCTION
- 1 -
Ground
- 2 -
Siren output
- 3 -
Positive supply
- 4 -
Positive output - turn indicators
- 5 -
Engine immobilization
- 6 -
Siren output
- 7 -
Engine immobilization
- 8 -
Positive output - turn indicators
For complete information regarding connections, please refer to the vehicle specific
(See available diagrams in the restricted area of our website:
PAGE 06 - INSTALLER MANUAL
WIRE COLOUR
-----
-----
-----
-----
GREEN-BROWN
BLACK marked "G"
LIGHT BLUE-GREY
LIGHT BLUE
GREEN-BLACK
WHITE-BLACK
YELLOW-BLACK
-----
-----
WIRE COLOUR
BLACK marked "M"
BLACK marked "R"
BLACK marked "H"
BLACK marked "H"
wiring diagram.
www.gemini-alarm.com
electrical connections,
!
disconnect the negative
battery terminal and re-
-----
-----
-----
-----
Button function not applicable
for this product version.
GREEN
BROWN
Do not connect
BLACK
RED
Negative input - external sensors
PINK
Positive/negative input - door switches
GREEN
BLUE
LIGHT BLUE-GREY (CAN-H)
Positive output - system armed (+A)
-----
-----
Lock command (negative)
Unlock command (negative)
-----
ORANGE
-----
ORANGE
Turn indicators connections: Select ONLY one of the following connections :
!
*
BLUE wire
condition
).
**
ORANGE wires
5.0 - WIRING DIAGRAM
Before carrying out
connect again after
completion.
STATUS LED
Green
Brown
Red
Black
GREEN-BLACK
GREEN-BROWN
LIGHT BLUE (CAN-L)
CAN BUS signal
PINK
WHITE-BLACK
YELLOW-BLACK
*
BLUE
HAZARD
(optical pulse signals)
In this case, DO NOT connect
(Ground to pair devices)
the alarm ORANGE wires to
the turn indicators.
:
Optical signals activated by connection to the Hazard switch will
.
:
turn indicator flashes for all optical signaling functions (factory enabled).
Connection
with supplied sounder
P/N 7746
8
7
6
5
4
3
2
1
BLACK marked "R"
15A
+
POSITIVE
Battery
BLACK marked "M"
GROUND
**
ORANGE
**
ORANGE
Output - turn indicators
"H"
BLACK marked
"H"
BLACK marked
8A
Engine immobilizer
MAX !
Bonnet switch
GREEN
+30
BLACK marked "G"
Ignition
ONLY
turn ON during an alarm
INSTALLER MANUAL - PAGE 07
Advertisement
Table of Contents
