Technical Specifications - Seco SBC-C20 User Manual

2.2 Technical specifications

Processors
NXP i.MX 8M Family of processors, based on ARM
Cortex-M4 core platform:
i.MX 8M Quad, Quad A53-core up to 1.5GHz, with GPU and VPU
i.MX 8M QuadLite, Quad A53-core up to 1.5GHz, with GPU only
i.MX 8M Dual, Dual A53-core up to 1.5GHz, with GPU and VPU
Memory
32-bit soldered down DDR3L memory, up to 2GB
Graphics
Vivante GC7000Lite GPU supporting OpenGL ES 1.1 / 2.0 / 3.0 / 3.1, Open CL
1.2 and Vulkan
Dedicated VPU (not for QuadLite), supporting 4Kp60 HEVC/H.265 main and main
10 decoder, 4Kp60 VP9 decoder, 4Kp30 AVC/H.264 decoder, 1080p60
MPEG-2, MPEG-4p2, VC-1, VP8, RV9, AVS, MJPEG, H.263 decoder
Dual Display support
Video Interfaces
embedded Display Port 1.4 connector (optionally switched with HDMI)
Optional LVDS interface
Optional HDMI 1.4 / 2.0a interface (switched with eDP)
4-lane MIPI_CSI Camera interface
Video Resolution
HDMI, eDP: up to 4096x2160
LVDS: up to 1920x1080
Mass Storage
microSD card slot
Optional eMMC drive on-board, up to 32GB
Networking
1x Gigabit Ethernet port
Optional WiFi (802.11 ac / a / b / g / n) +BT 5.0 module + antenna on-board
M.2 Socket 2 Key B 2260/3042 Slot for WWAN modules
microSIM slot soldered on-board for the Modem
SBC-C20
SBC-C20 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B./ A.R. - Reviewed by C.M. -Copyright © 2020 SECO S.p.A.
® ®
Cortex -A53 MPCore +
USB
Up to 2 x USB 2.0 Type-A sockets
Optional USB 2.0 internal connector (excludes one type-A socket)
USB Device on USB 2.0 micro-AB connector (interface shared with USB 3.0 port)
USB 3.0 Type-A connector (interface shared with USB 2.0 micro-AB)
Audio
I2S Audio Codec
Speaker + Microphone + Earphone interfaces on internal pin headers
Line Out + Mic In combo TRRS audio jack
Optional Speaker connector, 10W per channel amplified
Serial Ports
RS-232 Serial port connector
Debug UART on internal pin header
CAN Port
Other interfaces
microSIM slot for M.2 modems
SPI interface
I2C Touch Screen dedicated connector
8 x GPI/Os connector
Power supply voltage:
+12V
DC
Operating temperature**: 0°C ÷ +60°C (commercial version)
-40°C ÷ +85°C (industrial version, only boards without optional WiFi module)
Dimensions: 101.6 x 147 mm (4" x 5.78").
Supported Operating Systems:
Linux
Android
** Measured at any point of SECO standard heatspreader for this product,
during any and all times (including start-up). Actual temperature will widely
depend on application, enclosure and/or environment. Upon customer to
consider application-specific cooling solutions for the final system to keep the
heatspreader temperature in the range indicated.
Please also check paragraph 4.1
14