Table of Contents
Advertisement
2.2 Technical specifications
Processors
Rockchip RK3399 processor, 2x Cortex
MPCores, up to 1.8GHz, 64-bit architecture
Memory
Soldered-down LPDDR4 memory, up to 4GB total, 64-bit interface
Graphics
4-Core Mali-T860MP4 GPU
OpenGL ES 1.1/2.0/3.0/3.1, OpenVG 1.1, OpenCL, DX11 support
Embedded VPU, able to offer:
•
H.265 10-bit, H.264 10-bit, VP9 8-bit 4Kx2K@60fps HW Decoding
•
MPEG-4/MPEG-2/VP8 1080p@60fps HW Decoding
•
H.264, VP8 1080p@30fps HW encoding
Supports 2 independent video outputs
Video Interfaces
LVDS Single / Dual Channel interface
eDP 1.3 interface
HDMI 4K interface
DP 1.2 interface on USB Type-C connector (alternate mode)
Video Resolution
HDMI, DP: Up to 4K x 2K @60Hz
eDP: Up to 4096 x 2160 (4K)
LVDS: Up to 1920 x 1080 @60Hz
Mass Storage
SPI Flash (alternative to CAN Controller #1)
eMMC 5.1 Drive soldered on-board
microSD slot
Networking
Up to 2 x Gigabit Ethernet ports
Optional soldered onboard M.2 1216 WLAN 802.11 a/b/g/n/ac + BT 5.0 module
Optional on-board LTE Modem
®
®
-A72 MP cores + 4x Cortex
-A53
USB
1x USB 3.0 Type-C port (Alternate mode with DP)
1x USB 3.0 Host port on Type-A socket
2x USB 2.0 Host ports on Dual Type-A socket
Up to 2x USB 2.0 Host ports on internal pin header
Audio
Optional I2S Audio Codec w/ TRSS Jack (MicIn / Lineout)
Serial ports
1x Debug UART
Up to 2x RS-232 (factory options)
Up to 2x RS-485 (factory options)
Up to 2x CAN ports (factory options)
Other Interfaces
Optional 2x MIPI-CSI Camera connectors, 4-lanes CSI input each one
miniSIM slot or eSIM for on-board optional modem
I/O Connector #1 with I2C interface + 1x Open-Drain + (RS-232 or RS-485 -
factory alternatives)
I/O Connector #2 with 3x GPIOs + 1x PWM + (RS-232 or RS-485 or TTL UART -
factory alternatives)
Dedicated connector for I2C Touch Screen Controller Support
Optional Ultra-low Power RTC (Alternative to CAN Controller #2)
Optional SPI external interface (alternative to CAN Controller #1)
Optional LED Driver
Optional Trust Secure Element on-board
Power supply voltage: +12V
÷ +24V
DC
Operating temperature:
Commercial version: 0°C ÷ +60°C
Extended version: -20°C ÷ +85°C
Dimensions: 146 x 102 mm (
Supported Operating Systems:
Linux Yocto
Android (under development)
** Measured at any point of SECO standard heatsink for this product, during
any and all times (including start-up). Actual temperature will widely depend
on application, enclosure and/or environment. Upon customer to consider
application-specific cooling solutions for the final system to keep the
heatspreader temperature in the range indicated. Please also check
paragraph 4.1
DC
)
Advertisement
Table of Contents
