Gpio Status Led (Led1); Sys_Fault Led (Led4) - Analog Devices ADZS-BF707-BLIP2 Manual

GPIO Status LED (LED1)

When GPIO Status LED (
the board.

SYS_FAULT LED (LED4)

When the SYS_FAULT LED (
For more information, refer to the ADSP-BF70x Blackfin+ Processor Hard-
ware Reference.
ADZS-BF707-BLIP2 Board Evaluation System Manual
ADZS-BF707-BLIP2 Board Hardware Reference
) (yellow) is
LED1
) (red) is
LED4
, it indicates the status of
ON
, it indicates a system fault.
ON
2-7