Switching Off In An Emergency And Switching On Again - Fullwood M2erlin Operating Instructions For Safe Use

Ref / Pt.No: 294130
Revision: C
Date: 24-Mar-17
1 2
3
5
4
(Note: the machine is designed to be left on at all times; the above is for first time start up).
• Wet the floor and teat brushes of the machine to allow for easy cleaning afterwards
7.2

Switching off in an emergency and switching on again

•
The EMERGENCY STOP push button is located on the electrical cabinet
•
Switching off
•
Press the EMERGENCY STOP push button
•
Result
•
The EMERGENCY STOP button remains latched after actuation
•
All energy sources are disabled to the machine and the machine is prevented
from automatically re-starting.
•
Switching on
•
Precondition – the fault has been rectified and safe to continue
•
Turn the EMERGENCY STOP device to unlatch it
•
Turn off machine isolator on the electrical cabinet
•
Wait 5 minutes to allow all energy to dissipate from drives
•
Turn off RCBO and CB1 in the electrical cabinet
•
Turn on RCBO and CB1 in the electrical cabinet
•
Turn on ISOLATOR on the electrical cabinet
•
Result
•
The machine can now be started again by pressing the RESET button
294130
Operating Instructions for Safe Use
Fullwood M²erlin
1. Machine Stop (Black)
2. Reset (Blue)
3. Emergency Stop
4. Machine Isolator
5. Power on indication light
.
Page 26 of 81