High And Low Reach; Starting The Machine For The First Time; Preparation - Fullwood M2erlin Operating Instructions For Safe Use

Ref / Pt.No: 294130
Revision: C
Date: 24-Mar-17
6.2

High and Low Reach

Liner Type
Low position
High position

7. Starting the machine for the first time

7.1

Preparation

•
Only appropriately trained persons shall operate the machine.
•
Precondition
•
No personnel are working on the machine
•
No personnel on cow side of machine
•
All access doors are closed
•
All removable panels and guards in place and secured
•
Ensure the process cabinet door nearest the robot arm is closed before
operating.
•
Turn on the services to the robot; this includes:-
• Compressor
• Hot and cold water pumps
• Boiler (set to 92-96°C)
• Vacuum pump
• Feed augers.
•
Turn on the robot
•
turn on the isolator on the wall
•
verify the E-stop button (3) is not enabled on the robot
•
turn on the machine isolator (4) positioned on the electrical cabinet
•
press the RESET (2) button positioned on the electrical cabinet
294130
Operating Instructions for Safe Use
Fullwood M²erlin
FL
mm
268
792
SL
mm
280
804
Page 25 of 81