Interacoustics AA222 Instructions For Use Manual page 75

Impedance audiometer
Hide thumbs Also See for AA222:
Table of Contents

Advertisement

AA222 Instructions for Use – US
Temperature
Reflex Calibration Standards and Spectral Properties:
General
Contralateral Earphone Pure tone:
Ipsilateral Earphone
The risk of artifacts at higher stimulus levels in reflex measurements are minor and will not activate the
reflex detection system
Probe tones
0 meters
226 Hz
1.0 mmho
678 Hz
3.0 mmho
800 Hz
3.54 mmho
1000 Hz
4.42 mmho
The pressure accuracy is: ±10 daPa or 10%, whichever is greater.
To minimize the influence of temperature, barometer pressure, humidity and
height above sea level, it always recommended to calibrate the unit in the local
positions.
The temperature have no theoretic impact on the impedance calculation, but the
temperature has influence on the electronic circuits. This temperature influence for
the standard specified temperature range (15-35 °C) is inside: Admittance can
vary inside: ± 5%, ± 0.1 cm
Specifications for stimulus and audiometer signals are made to follow IEC 60645-5
Wide Band noise (WB):
Spectral properties:
Low Pass noise (LP):
Spectral properties:
High Pass noise (HP):
Spectral properties:
Pure tone:
Wide Band noise (WB):
Spectral properties:
Low Pass noise (LP):
Spectral properties:
High Pass noise (HP):
Spectral properties:
General about levels:
500 meters
1000 meters
1.06 mmho
1.13 mmho
3.19 mmho
3.40 mmho
3.77 mmho
4.01 mmho
4.71 mmho
5.01 mmho
3
-9
3
, ±10
m
/Pa·s, whichever is greater.
ISO 389-1 for TDH39 and ISO 389-2 for CIR.
Interacoustics Standard
As "Broad band noise" specified in IEC 60645-5, but
with 500 Hz as lower cut-off frequency.
Interacoustics Standard
Uniform from 500 Hz to 1600 Hz, 5 dB re. 1000 Hz
level
Interacoustics Standard
Uniform from 1600 Hz to 10KHz, 5 dB re. 1000 Hz
level
Interacoustics Standard.
Interacoustics Standard
As "Broad band noise" specified in IEC 60645-5, but
with 500 Hz as lower cut-off frequency.
Interacoustics Standard
Uniform from 500 Hz to 1600 Hz, 10 dB re. 1000 Hz
level
Interacoustics Standard
Uniform from 1600 Hz to 4000 Hz, 10 dB re. 1000 Hz
level
The actual sound pressure level at the eardrum will
depend on the volume of the ear.
Page 69
2000 meters
4000 meters
1.28 mmho
1.65 mmho
3.85 mmho
4.95 mmho
4.55 mmho
5.84 mmho
5.68 mmho
7.30 mmho

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1078

Table of Contents