Standard mapping 3-4
5.1
Message in output direction
5.1.1
Event list
Offset
0
Control_O
1
Control_O_1
5.1.2
Single commands and taggings
Offset
Designation of the SIPROTEC objects
2 / 0
<user-defined> OFF
2 / 1
<user-defined> ON
2 / 2
<user-defined> OFF
2 / 3
<user-defined> ON
2 / 4
<user-defined> OFF
2 / 5
<user-defined> ON
2 / 6
<user-defined> OFF
2 / 7
<user-defined> ON
3 / 0
<user-defined> OFF
3 / 1
<user-defined> ON
3 / 2
<user-defined> OFF
3 / 3
<user-defined> ON
3 / 4
<user-defined> OFF
3 / 5
<user-defined> ON
3 / 6
<user-defined> OFF
3 / 7
<user-defined> ON
4 / 0
<user-defined> OFF
4 / 1
<user-defined> ON
74
• Information regarding the handshake bytes as well as the retrieval methods of the
event list via PROFIBUS DP can be found in the manual "SIPROTEC Communica-
tion module, PROFIBUS DP - Communication profile".
• Ref. to chap. 1.4.1.4 for notes regarding the redundancy function control byte.
Designation
• Single commands and taggings can be routed on these positions as "Source
system interface" using the DIGSI Configuration matrix.
Comments
Handshake byte for event list via PROFIBUS DP
Control byte for redundancy function
Comments
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
not pre-allocated
SIPROTEC PROFIBUS DP - Bus mapping 6MD662/3/4
Internal
object no.
-
-
Internal
object no.
-
-
-
-
-
-
-
-
-
C53000-L1840-B011-03