Preface - Siemens SIPROTEC Manual

Preface

Purpose of this
manual
PROFIBUS DP
communication
profile
documentation
PROFIBUS DP
specification
SIPROTEC PROFIBUS DP - Bus mapping 6MD662/3/4
C53000-L1840-B011-03
This manual describes the data in the PROFIBUS DP messages of the SIPROTEC
device 6MD662/3/4 and is devided into the following topics:
• Redundant PROFIBUS DP interface → Chapter 1,
• Data of the PROFIBUS DP messages → Chapter 2,
• Standard mappings 3-1 and 3-3 → Chapter 3,
• Standard mapping 3-2 → Chapter 4,
• Standard mapping 3-4 → Chapter 5.
General details about the function, operation, assembly and commissioning of the
SIPROTEC devices you find in the
• SIPROTEC4 System Manual, order no. E50417–H1176–C151.
The following additional manual informs you about the data types, bus specific param-
eters, DIGSI parameterization and hardware inteface of the PROFIBUS DP slave
modul of the SIPROTEC devices:
Manual
SIPROTEC Communication module,
PROFIBUS DP - Communication profile
You can download this manual
or please contact your Siemens representative.
The PROFIBUS DP specification and the structure of the PROFIBUS DP messages
are defined in the International Standards:
IEC 61158
"Digital data communications for measurement and control -
Fieldbus for use in industrial control systems"
Communication profile type 3
IEC 61784
"Digital data communications for measurement and control"
Communication profile family CPF3/1
from Internet http://www.siprotec.com
Order number
C53000-L1840-B001-03
3