Messages In Output Direction: Profibus Dp Master To The Siprotec Device; Message In Output Direction - Siemens SIPROTEC Manual

Data of the PROFIBUS DP messages
2.2 Messages in output direction:
PROFIBUS DP master to the SIPROTEC device
42
The messages in PROFIBUS DP output direction (ref to chap. 3.1, 4.1 and 5.1) allow:
• command outputs through the output relays of the SIPROTEC devices
(external commands),
• manipulation of taggings (internal commands).
Note:
• The allocation of the output relays to the switching devices and to the output chan-
nels is defined during parameterization of the SIPROTEC devices.
• Depending on the device composition there may be less than indicated output
relays (and corresponding PROFIBUS DP message positions) available in the
SIPROTEC device.
SIPROTEC PROFIBUS DP - Bus mapping 6MD662/3/4
C53000-L1840-B011-03