NP-70
4-71
d) Loosen the nut on the adjust screw and turn the screw until the proper spacing is
achieved.
e) Resecure the nut to lock the screw position.
Pickup Arm
~,
Up -down
Actuation
Fig. 4-83 Pickup Roller Height Adjustment
Adjust Screw
Pickup Arm Brace
f) After completing the adjustment, restore the copier to normal operation by installing
the Drum Unit, Cassette Assembly and Developer Assembly.
6)
LUBRICATION
Apply lubricating oil (TET-27) to the point indicated in Fig. 4-84 and 4-85.
Lubricating Points
1
r
Fig. 4-84 Paper Feed Cam Drive Lubrication
© CANON INC.
Second Printing~une, 1974