Fig. 3-26 Voltage Adapter Pedestal -Schematic Diagram; Table 3-7 Voltage Converter Specifications - Canon NP-70 Service Manual

3-64
NP•70
3.4-11 VOLTAGE ADAPTER PEDESTAL (100VAC COPIERS ONLY)
The voltage adapter pedestal is a special until available to permit the use of 100VAC copier
(Product No. 8-11156 & 8-11157) in countries where the standazd AC line voltage is higher.
This unit contains a voltage converter to step-down the AC line voltage to that required by the
copier.
Fig. 3-26 shows the schematic diagram of the pedestal, with the area enclosed by the dotted
line representing the voltage converter.
LINE VOLTAGE INPUT
SW J
CONVERTER
TRANSFORMER
METER
o
COPIER AC
o
OUTPUT
J
_ PEDESTAL
Fig. 3-26 Voltage Adapter Pedestal -Schematic Diagram
It should be noted that two converters are available for use with the pedestal. Table 3-
provides the specifications for these two models.
Converter
Model #
Adaptable
Input Voltage
Input Taps
Output
Voltage
88-4373
100VAC ^- 130VAC Seven (7) taps at
intervals of SVAC
100VAC
88-4374
170VAC ~- 260VAC Ten (10) taps at
intervals of lOVAC
100VAC
Table 3-7 Voltage Converter Specifications
Second Printing,lune, 1974
© CANON INC.