Table of Contents
Advertisement
VIPA System SLIO
HB300 | CP | 040-1CA00 | en | 18-28
4.
Turn all the locking lever of the module group to be exchanged upwards.
5.
Pull the module group forward.
6.
For mounting turn all the locking lever of the module group to be mounted upwards.
7.
To mount the module group put it to the gap between the both modules and push it,
guided by the stripes at both sides, to the mounting rail.
8.
Turn all the locking lever downward, again.
9.
Plug again the electronic module, which you have removed before.
10.
Wire your module group.
ð Now you can bring your system back into operation.
Basics and mounting
Demounting periphery modules
27
Advertisement
Table of Contents
