Settings; Modifying The User Parameters; User Menu; Circa / Circb Sub-Menus In The User Menu - DeDietrich MIV-4S AWHP 6 MR-3 User Manual

6

Settings

6.1

Modifying the User parameters

Fig.31
Fig.32
6.2

User menu

Fig.33
1 Sub-menu available
2 Name of the PCB or circuit
Tab.14
List of User sub-menus
Sub-menu
Tab.15
Parameter Description
CP010 Zone flow temperature setpoint, used when the zone is set to a fixed
flow setpoint.
For the
7682850 - v02 - 09012018
2
Description
Main heating circuit
Additional heating circuit B
Domestic hot water circuit
Central unit PCB EHC-04
Additional PCB for circuit B
HMI control panel
PCB: Can be set from 7 to 100°C
Caution
Altering the factory settings may impair operation of the appliance.
1. Go to the User menu.
2. Select the desired sub-menu by pressing the
3. Confirm the selection by pressing the
4. Select the required parameter by pressing the
through the list of adjustable parameters.
5. Confirm the selection by pressing the
6. Modify the value of the parameter using the
7. Confirm the new value of the parameter by pressing the
8. Go back to the main display by pressing the
1
3 Setting parameters
6.2.1 CIRCA / CIRCB sub-menus in the
CP : Circuits Parameters = Heating circuit parameters
or key.
key.
or keys to scroll
key.
or keys.

key.
3
MW-2000435-1
2
Name of the PCB or circuit
User menu
Factory setting Factory setting
not available 50
MIV-4S
6 Settings
key.
29