Settings; List Of Parameters; Choosing The Hybrid Operating Mode; Energy Cost Parameters - DeDietrich AWHP-2 MIV-3 User Manual

6

Settings

6.1

List of parameters

Parameter Description
Hybrid operating mode
(1)
(1) Only available if = 0
Tab.13 Energy cost parameter
Parameter Description
Tariff per kWh of electricity
(1)
For a standard electricity tariff, input the parame­
ter
Tariff per kWh of electricity (off-peak hours)
For a Peak Hours / Off-peak Hours electricity tar­
iff, input the parameters
tariff and
Fossil energy tariff for the hydraulic back-up
Gas boiler: Tariff per m
Oil boiler: Tariff per litre of oil. Example: €/litre
(1) Only available if = 0
7611973 - v04 - 07032016

6.1.1 Choosing the hybrid operating mode

Adjustment range
0 to 2
0 = Deactivated
1 = Optimisation of primary energy consump­
tion
2 = Optimisation according to energy cost

6.1.2 Energy cost parameters

.
for the Peak Hours
for the Off-peak Hours tariff.
3
of gas. Example: €/m
Note
It is imperative that you input the energy cost parameters
and to use the hybrid operating mode optimised according
to energy cost
Caution
The currency for parameters
same. Example: in euro per kWh and
Note
The parameters ,
Adjustment
range
0.01 to 2.00
0.01 to 2.00
0.01 to 2.50
3
Increment
1
, and must be the
in euro per litre.
and are available only if
Increment Factory setting
0.01 0.13
0.01 0.09
0.01 0.9
AWHP-2 MIV-3
6 Settings
Factory set­
ting
0
,
= 2.
21