1. Desk overview
The desk clamp bracket
can be repositioned to
suit different mounting
surface thicknesses.
2. How to reconfigure desk clamp
2.1 Remove screws
(M8 x 16mm Countersunk screw)
3. Post mount configuration
3.1 Attach clamp to post
M8 x 30mm
Countersunk
screw Tighten
firmly
4. Bolt through - Drill Hole
4.1 Drill 9mm hole in
desired post position
on work surface.
Clamp
Desk
55mm
(2.2")
2.2 Remove clamp plate
3.2 Place in desired location
9mm
(3/8")
Default
52mm
(2.1")
88mm
(3.5")
MIN THICKNESS - 0mm (0")
MAX THICKNESS - 39mm (1.5")
2.3 Invert bracket
3.3 Screw pressure plates in and tighten firmly.
5. Bolt Pole to work surface
M8x60mm
Screw
5mm
Allen Key
Inverted
140mm
(5.5")
MIN THICKNESS - 35mm (1.4")
MAX THICKNESS - 76mm (3")
2.4 Replace clamp plate
Pressure Plate
M10 Desk Clamp Screw
5mm Allen Key
Bolt
Through
Plate
Note orientation of
plate with pole
2.5 Reattach bracket
AF-AT Page 2 of 4
Need help?
Do you have a question about the AF-AT and is the answer not in the manual?