Installation Guide AF-AT-W Wall Mounted Monitor Arm COMPONENT CHECKLIST Arm Assembly (x1) Primary arm Secondary arm 2.5mm REQUIRED TOOLS cable cover cable cover Allen key Allen key (x1) (x1) (x1) (x1) • Power Drill • Drill Bit End Cap • Phillips Head Screwdriver VESA (x1) head...
Page 2
1. Position Wall Plate As a guide, it is recommended Note: The wall-mounted that the bottom of the arm provides vertical Wall Plate be positioned adjustment of 128mm. approximately 140mm (5 1/2”) above the desktop. 128mm (5”) 140mm (5 1/2”) 2.
Page 3
4. Install VESA monitor head 4.1 Install VESA monitor head as shown 100mm Screen VESA monitor head 100mm M4x10/12/16mm Phillips Head Mounting Screws Optional Spacers (may be required for recessed and uneven surfaces) 5. Mounting Monitor 5.1 Insert VESA monitor head into 5.2 OPTIONAL SECURITY SCREW the receptacle in the Arm Assembly Ensure the Monitor is supported, then loosen the Monitor...
Need help?
Do you have a question about the A F -AT-W and is the answer not in the manual?
Questions and answers