Vrm Unit; Cursor Mode - JRC JMA-3400 Series Instruction Manual

5.18.3 VRM UNIT

Set the VRM unit.
The unit can be selected from following.
NM/km/sm/Link Range

5.18.4 CURSOR MODE

This function enables the setting of detail information about cursor display.
Set the bearing mode, length, unit and pattern of cursor.
Set the bearing mode of cursor ("Bearing Mode"). Bearing mode is selected "True" or "Relative."
When "True" is selected, true bearing of cursor is displayed.
When "Relative" is selected, the relative angle of the own ship's heading bearing is displayed as the bearing
of cursor.
Set the distance unit for cursor ("Unit").
Unit is selected from "NM", "km", "sm" and "Link Range."
Set the length of the cross cursor mark on the radar display ("Size").
Select the type of the cursor mark on the radar display ("Pattern").
Pattern is selected from following list.
Thin Cross
Thin Cross
(Empty of Center)
Thick Cross
Thick Cross
(Empty of Center)
Numeric display uses these settings of bearing mode and unit in this function.
For details of numeric display setting, see "8.9.5 NUMERIC DISPLAY."
Chapter 5 VARIOUS FUNCTIONS
89