Table of Contents
Advertisement
Specifications
Definitions
Specifications (guaranteed)
Typical values (characteristics)
General characteristics
Measurement conditions
132
Generally, all specifications are valid at the stated operating and
measurement conditions and settings, with uninterrupted line
voltage.
Describes warranted product performance that is valid under
the specified conditions.
Specifications include guard bands to account for the expected
statistical performance distribution, measurement
uncertainties changes in performance due to environmental
changes and aging of components.
Characteristics describe the product performance that is
usually met but not guaranteed. Typical values are based on
data from a representative set of instruments.
Give additional information for using the instrument. These are
general descriptive terms that do not imply a level of
performance.
Specifications require an angled connector at the source output
and at optical input ports 1 and 2 of the optical receiver.
Angled contact connectors help you to control return loss.
The contact connector on your Lightwave Component Analyzer
is angled, use only cables with angled connectors. The
Lightwave Component Analyzer input requires angled
connectors. Do not use a cable with a flat connector on either
the angled input connector or on the angled output connector.
The angled connector symbol is typically colored green.
• Modulation frequency range from 10 MHz to 4.5 GHz
• Foreward and reverse RF power +5 dBm
• Number of points 899
Keysight N4374B Lightwave Component Analyzer, User's Guide
Advertisement
Table of Contents
