Table of Contents
Advertisement
v01.0910
PLLs WITH INTEGRATED VCO - MICROWAVE APPLICATIONS
EVALUATION BOARD OPERATING GUIDE
5.0
Operating Procedure
a
Step 1. read the "readMe" file for Microwave PLL with integrated Vco on the cd for instruction.
Step 2. Setup the evaluation board as shown in Figure 1.
Step 3. turn +5.5V and +15V supplies on.
Step 4. Launch the control program (located initial on the cd).
Step 5. From the drop down list, select the part under test, for example, HMc764LP6ce (See Figure 9).
Figure 9. Part Selection Menu
Order On-line at
www.hittite.com
For technical application questions: Phone: 978-250-3343 or
pll@hittite.com
A - 11
Advertisement
Table of Contents
