Life Cycle; Disposal Notes; Makeup Of System/Description Of Functions; Use - Siemens LMO39 Series Basic Documentation

Burner controls
Table of Contents

Advertisement

12/61
Building Technologies

1.9 Life cycle

Burner controls have a designed lifetime* of 250,000 burner startup cycles which, under
normal operating conditions in heating mode, correspond to approx. 10 years of usage
(starting from the production date given on the type field). This lifetime is based on the
endurance tests specified in standard EN 298.
A summary of the conditions has been published by the European Control
Manufacturers Association (Afecor) (www.afecor.org).
The designed lifetime is based on use of the burner controls according to the
manufacturer's Data Sheet and Basic Documentation. After reaching the designed
lifetime in terms of the number of burner startup cycles, or the respective time of usage,
the burner control is to be replaced by authorized personnel.
* The designed lifetime is not the warranty time specified in the Terms of Delivery

1.10 Disposal notes

The unit contains electrical and electronic components and must not be disposed of
together with domestic waste.
Local and currently valid legislation must be observed.
2
Makeup of system/description of
functions

2.1 Use

LMO39... are used for the startup and supervision of 1- or 2-stage oil burners in
intermittent operation.
Yellow-burning flames are supervised with photo resistive detectors QRB1 / QRB3 or
yellow flame detector QRB4, blue-burning flames with blue flame detector QRC.
Applications in accordance with EN 267:
Type-tested and approved in accordance with DIN EN 298

2.2 Features

Undervoltage detection
Electrical remote lockout reset facility
Multicolor indication of fault status and operational status messages
Limitation of the number of repetitions
Accurate and reproducible program sequence through digital signal handling
Controlled intermittent operation after 24 hours of continuous operation
BCI
For use with stationary direct-fired air heaters
Bridging contact for oil preheater
Monitoring of time for oil preheater
Basic Documentation LMO39...

2 Makeup of system/description of functions

Gas burners for liquid fuels
CC1P7154en
15.03.2018

Advertisement

Table of Contents
loading

Table of Contents