Table of Contents
Advertisement
Available languages
Available languages
www.heinner.com
IV. OPERATING INSTRUCTIONS
1.
This sandwich maker incorporate an interchangeable cooking plate，choose your
desired cooking plate, which is dependent on the task performed. The way of clipping
and unclipping different cooking plate is as illustrated below.
2.
Connect the plug into rated voltage and the cooking surface begin pre-heating and
the red lamp will be illuminated. Once the cooking surface has reached the preset
temperature (usually it will take about 6 minutes) the green lamp will be illuminated
and this Sandwich Maker is ready to toast.
3.
Place one slice of bread on the bottom of heating plate with the greased side
downside. And add filling on the bread. Then place another slice of bread on the filling
with the greased side up.
4.
Close the Sandwich toaster and lock the handle.
5.
The sandwich is ready once the green lamp is off. Unplugging the unit could
terminate the heating process at any time.
Caution:
1.
If too much food is inserted into the appliance and the sandwich toaster cannot
be closed. Never close it with undue force as this would do damage to the handle.
2.
Never using sharp fork or knife to remove the food as this would damage the
non-stick coating of cooking surface. Use heat-resistant wood or plastic utensils only.
3.
Before unclipping the cooking plate make sure the appliance has been disconnect
from power supply and cooking plate is cool enough.
Warning: Never touch the metal plate of the top lid during operation. As the metal
plate is very hot scalding may occur if touched the metal plate.
650-800W, 50/60Hz, 220-240V
10
Advertisement
Table of Contents
