Yetter STALK DEVASTATOR 5000 Series Owner's Manual page 16

ASSEMBLY INSTRUCTIONS
Step 5:
Slide the roller mount tubes to align the row center with the traction bars. Fully tighten
hardware. In some circumstances, the traction bar may have to be off-center of the row some.
Step 6: (If Applicable) On chopping corn heads, trim 3 inches off the bottom of
the back curtain to keep the roller from contacting the curtain.
NOTE: Make sure the chopping blades are sharp enough to size the residue into
smaller pieces for better flow between the back curtain & roller mount tube.
16