Yetter STALK DEVASTATOR 5000 Series Owner's Manual page 14

Step 2: Install the 5000-292 Torsion Arm onto the Torsion Pivot Assembly & secure with the ¾"
x 8" bolts & ¾" lock nuts. Refer to the diagrams on the pages 10 – 12 to determine which side of
the Torsion Pivot Assembly to install the 5000-292 Torsion Arm.
Step 3: Attach the roller mount to the pivot arms using the ½" x 2-1/2" x 3-1/2" U-bolts & lock nuts. See
the diagrams on pages 10 – 12 to determine the orientation of the roller & roller mount tube locations.
NOTE: The bearing support tab on the roller mount tube should be on the backside of the bearing mount plate.
14
ASSEMBLY INSTRUCTIONS