Replacing The Cutting Deck's Belt - Husqvarna P 524 Operator's Manual

Check the air duct, located on the inside of the engine cover,
ensure it is clean and does not rub against the cooling air
intake.
A clogged air intake grille, air duct or cooling air intake impairs
the cooling of the engine, which may result in engine damage.
Replacing the cutting belt
Dismantling
The entire cutting deck belt is removed according to the
following when a snow blade is to be attached to the machine.
1 Loosen the automatic belt tensioner rod.
2 Pull the spring rod from the lifting chain.
3 Remove the cutting deck belt.
28 –
English
MAINTENANCE
Assembly
1 Fit a new cutting deck belt according to the belt position
diagram.
2 Assemble in the reverse order. Make sure the cutting deck
belt sits correctly in the adjuster pulley.
3 Reinsert the lifting chain and lock it with the rod so that
one chain link is visible.
4 Reset the cutting deck from service position to mowing
position.