Attaching And Securing The Storage Unit To The Boiler, On The Side; Placing The Upper Lids; Enabling The Pellet Level Sensor - Baxi CBP Matic 18 Manual

Figure 51 – Attaching and securing the storage unit to the boiler, on the side
12 – Finally, you should place the upper lids and re-attach the screws.

Enabling the pellet level sensor

At the end of the storage unit's installation it is necessary to activate the pellet level
sensor in the boiler's display. For this, you should enter the technical menu.
(Password only provided to authorized technical personnel)
Figure 52 – Placing the upper lids
MODE
MAN
AUT
esc
ESC
OFF
< Technical Menu >
OFF
OFF
-
MENU
ON
Set
OFF
OK
OFF
OF
OFF
+
F
64