Placement Of The Sensor Over The Pellets; Adjustment Of The Sensor Sensitivity - Baxi CBP Matic 18 Manual

Figure 26 – Placement of the sensor over the pellets
- Rotate the adjustment knob counter clockwise so that the lights go out (if they are
not already out) –
a) b)
c)
Figure 27 – Adjustment of the sensor sensitivity
- Then, with the light of the sensor on, you should move the sensor away from the
pellets and check that the light go out (Figura 28-a) and re-approach and check that
the light come on when approaching the pellets (Figura 28-b)
47