Description Of Operation - Baxi CBP Matic 18 Manual

The optional storage unit set includes:
- Storage unit;
- Casters for moving the storage unit;
- Worm drive channel to transport the pellets into the boiler's internal tank;
- Electric power enginer to rotate the worm drive screw;
- Circuit board with wiring included;
- pellet level sensor of the storage unit
Together with the storage unit a connection kit to the boiler is provided and it
includes:
- Instruction manual;
- Storage unit instruction manual;
- Flexible hose with metal bracket to connect the storage unit to the boiler;
- Cable to connect the storage unit level sensor and Pellet level sensors for the
boiler's internal tank to the circuit board;
- Cable for electrical connection of the deposit;
- Ramp to put inside the boiler's tank;
- Parts for the rear and lateral fixation of the storage unit to the boiler;
- Screws for attaching the level sensors to the tank of the boiler.

Description of operation

When the level sensors of the boiler's internal tank ceases to detect pellets (the
sensor lights go off) the electric power engine of the storage unit is triggered, by
rotating the worm drive screw of the storage unit. Thus the pellets are transported
from the storage unit to the boiler's internal tank. The electric power engine will run
continuously until the sensors in the boiler's tank detect pellets again (sensor lights
turn on). When this happens, the electric power engine stops.
Thus, the storage unit system will be triggered each time the pellets level in the
boiler's tank is low, preventing the boiler's flame is extinguished due to the lack of
pellets.
In the storage unit, there is also a sensor that detects the level of pellets. When
the pellets level is low, the sensor will cease to detect the pellets (the sensor light
42