Connecting The Level Sensor To The Boiler; Placing The Storage Unit Next To The Boiler - Baxi CBP Matic 18 Manual

d) e)
Figure 48 – Connecting the level sensor to the boiler
9 – Then, you should approach the storage unit to the boiler and insert the flexible
hose into the ramp to drop the pellets (Figura – b e c). The storage unit must be at a
spacing of 1 cm to the side of the boiler and must be aligned with this by the rear.
a) b)
c)
Figura 49 – Placing the storage unit next to the boiler (a); connecting the storage unit to the
boiler's pellet tank (b e c)
62