Optional Operations - Thermo Scientific Dionex AutoTrace 280 Operator's Manual

Dionex AutoTrace 280 Operator's Manual
2.6.2

Optional Operations

The table below describes the optional operation steps that can be added
to an SPE method.
Operation
Rinsing the sample
container
Drying with gas
Pausing operation
Increasing absorption
time
Cleaning the sample
path
Concentrating the
sample
42
Description
Use Rinse Sample Container to manually add
solvent and swirl to rinse the sample container walls
before continuing.
Use Dry with Gas to flow gas through the cartridge
or disk, clearing the path of residual water.
Use Pausing Operation to delay operation or to stop
operation and signal manual intervention.
Use Elute to Soak before an Elute to Collect step to
allow solvent to soak the cartridge or disk.
Use Clean Sample Path method steps between
sample batches to prevent cross-contamination.
Use Concentrate Sample for automated
concentration of the eluent.
Doc. 065330-05 03/2020