Safety Information; Safety Messages And Notes - Thermo Scientific Dionex AutoTrace 280 Operator's Manual

Dionex AutoTrace 280 Operator's Manual
Appendix D
Glossary
1.3

Safety Information

The Dionex AutoTrace 280 is manufactured by Thermo Finnigan LLC at the
following location: 355 River Oaks Parkway, San Jose, CA 95134-1991 U.S.A.
The Dionex AutoTrace 280 is designed to perform solid-phase extraction water
methods. Operation of a Dionex AutoTrace 280 in a manner not specified by
Thermo Fisher Scientific may result in personal injury.
If there is a question regarding appropriate usage, contact Technical Support for
Dionex products before proceeding:
•
In the U.S. and Canada, call 1-800-532-4752, and select option 2.
•
Outside the U.S. and Canada, call the nearest Thermo Fisher Scientific office.
1.3.1

Safety Messages and Notes

This manual contains warnings and precautionary statements that can
prevent personal injury and/or damage to the Dionex AutoTrace 280
when properly followed. Safety messages appear in bold type and are
accompanied by icons, as shown below.
Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury. Also used to identify a situation or
practice that may seriously damage the instrument, but will not cause
injury.
Indicates that the function or process of the instrument may be
impaired. Operation does not constitute a hazard.
4
Defines terms used in the Dionex AutoTrace 280
operator's manual.
Doc. 065330-05 03/2020