Washing And Cleaning; Storage; Maintenance Table - Hakki Pilke Raven 33 Manual

4.11

WASHING AND CLEANING

Loose debris and sawdust can be cleaned from the machine with pressurised air, for example. The machine can
also be washed with a pressure washer, as long as the water jet is not aimed directly at the bearings or electrical
equipment.
Always ensure that the machine and the working area are sufficiently clean during operation. The machine must
always be cleaned after use. Clean the machine as necessary, and always before storing the machine for a pro-
longed time. After washing, the machine must be lubricated according to the instructions in Section 4.11.
4.12

STORAGE

The firewood processor must be stored on a level and solid foundation. Although the machine is intended for
outdoor use, it should be covered and stored in a sheltered location or indoors. Before prolonged storage, the
machine must first be cleaned, then washed according to Section 4.12 and lubricated according to Section 4.10.
4.13

MAINTENANCE TABLE

Item Task
Multiplier gear Check (leaks)
oils 1st change
(PTO model only) Subsequent
Hydraulic oil Check
Normal condi- 1st change
tions Subsequent
Oil filter Always when
changing oil
Cutting blade Sharpen as neces-
sary
Machine Clean
Wash
Electric motor Cleaning
Electrical equip- Clean/check visu-
ment ally
Winch and strap Check
Lubrication Lubrication/check X
(section 4.9)
HAKKI PILKE RAVEN 33
38
Daily Interval
50 t
X
X
X
X
X
X
X
X
TRANSLATION
Interval Sub-
500 h stance/accessory
item
SAE 80/90 approx.
0.1 l
X See Section 4.8.
Amount approx.
40 l
X Such as Teboil S 32
HEK02-20.077-AS-
SPO25-VM-B17-B
Spare part num-
ber: 97290
0.325" 66/1.5
Spare part num-
bers:
Chain: 95148
Bar: 95145
Lubricant
such as multi-
purpose grease
VERSION 1