Table of Contents
Advertisement
3.5
AFTER USE
1. After you have finished making firewood, stop the out-feed conveyor, shut down the machine and re-
move the firewood from the splitting groove and conveyor.
2. Check that the machine has not been damaged.
3. Place the out-feed conveyor into a position that allows the conveyor and firewood processor to be moved
safely off the processed firewood.
4. Clean the machine.
If you will not be using the firewood processor for a while, do the following:
5. As necessary, use your tractor's hydraulics or a forklift to hoist the firewood processor and carefully move
it to a location where you can place the in-feed and out-feed conveyors as well as the working platform
into their transport and storage positions.
6. Place the conveyors into the transport and storage position.
7. Clean the machine and carry out any maintenance.
8. Store the machine according to the instructions in Section 4.13.
4 Maintenance and adjustment of the machine
The machine must be disconnected from its power source before maintenance, adjustment, replacement or
cleaning procedures. Only use spare parts that are supplied by the manufacturer or your retailer. If the guards of
the machine have to be removed for maintenance, they must always be reattached before activating the ma-
chine. After maintenance and adjustment measures, the machine must be test run according to the instructions
in Section 3.3.
4.1
DISCONNECTING THE MACHINE FROM ITS POWER SOURCE
Tractor-powered model
Turn off the tractor and disconnect the machine's cardan shaft from the tractor.
Electrically-powered model
Turn off the machine and disconnect the power cable from the socket.
Ensuring that the machine is inactive
Once you have disconnected the machine from its power source, always ensure that the machine is completely
inactive before performing any other measures!
HAKKI PILKE RAVEN 33
24
TRANSLATION
VERSION 1
Advertisement
Table of Contents
