Lifting And Moving The Machine - Hakki Pilke Raven 33 Manual

15
2.5

LIFTING AND MOVING THE MACHINE

When moving the machine, make sure that the moving and lifting capacity of your tractor or fork-
lift is sufficient for the weight of the machine (approx. 750 kg without accessories). Only lift the
machine by the indicated lifting points or with the lifting equipment of the tractor.
Figure 12. Lifting points of the machine
When connecting the machine to the tractor's lifting equipment, there must be no one in the tractor cabin, so as
to prevent any accidental contact with the controls. Check all the connecting devices of the tractor and the fire-
wood processor before connecting them. Never use faulty equipment. The pins that are used to connect the
pushbars and drawbars to the machine must be of the correct size, and the appropriate locking pins must be used
to secure them.
The machine must be placed in the transport position whenever it is moved. Exercise extreme caution when mov-
ing the machine in the operating position. Always lower the machine to the ground when you stop.
Note! Incorrect lifting may cause a hazardous situation or damage the machine.
HAKKI PILKE RAVEN 33 TRANSLATION VERSION 1