Operating Conditions; Safety Instructions; Noise And Vibration - Hakki Pilke Raven 33 Manual

The machine's serial number, date of manufacture, weight, operating voltage (electrically operated machines)
and model are indicated on the grey type plate located on the machine frame below the locking latch of the out-
feed conveyor, on the right side of the operator.
1.4

OPERATING CONDITIONS

The temperature range within which the machine can be operated is -20 to +30
must ensure that there is no risk of slipping in the working area.

The working area must be level and clear of unnecessary items. No unauthorised persons are allowed to
enter the working area. The machine may only be used in sufficient lighting conditions. These require-
ments must be met for the entire duration of the work.

The machine may not be used indoors.
1.5

SAFETY INSTRUCTIONS


This device is intended to be operated by only one operator. The danger zone is 10 m from the machine.

Persons under 18 years of age may not operate the machine.

The operator must ensure that the use of the device does not cause danger to others and that there are
no unauthorised persons in the danger zone.

The machine must not be operated while under the influence of alcohol or other drugs, or when tired.

The machine must not be operated unless the operator has familiarised themselves with this instruction
manual.

The machine has been designed solely for making firewood.

The machine must be placed in the transport position whenever it is moved. When transporting the ma-
chine on a public road, it must be equipped with additional lights.

The operator is not permitted to modify the structure or operation of the machine or remove protective
equipment.

The operator must wear ear protectors, sufficiently tight-fitting work clothing and gloves, protective gog-
gles and safety footwear.

Before starting up the machine, the operator must ensure that the machine and its guards are intact.

When powering the machine with a tractor, the operator must ensure that the cardan shaft is undam-
aged and that the selected rpm range is correct. The machine must be attached to the tractor's lifting
equipment during operation.

Before starting up the firewood processor, the operator must ensure that all the control and safety devic-
es are functional.

When cleaning the machine or carrying out any maintenance, it must be disconnected from its power
source.
Note! Do not leave a running machine unsupervised!
1.6

NOISE AND VIBRATION

A-weighted maximum sound pressure at the working location is 94 dB (L
during the work cycle is 105.0 dB (L
HAKKI PILKE RAVEN 33
5
). The vibration values do not exceed 2.5 m/s2.
WA
TRANSLATION
°C
. In the winter, the operator
) and the sound power level
pASmax
VERSION 1