Height Adjustment Of The Splitting Blade - Hakki Pilke Raven 33 Manual

26
Figure 20. Limiter plate position for smaller logs
4.3

HEIGHT ADJUSTMENT OF THE SPLITTING BLADE

The splitting blade can be controlled mechanically by moving the control lever (Figure 21) up or down. The split-
ting blade can be raised by moving the lever (Figure 21) to the left and vice versa, as indicated by the label in Fig-
ure 21. Logs should always be as centred as possible when passing the blade in order to keep the size of the fire-
wood consistent.
The blade can be driven to the lowest position in one go by raising the blade and clearing the
space under the blade of firewood. The machine must be shut down for the duration of the
cleaning.
Figure 21.
HAKKI PILKE RAVEN 33 TRANSLATION VERSION 1