General Information; Introduction; Purpose Of Use; Machine Models And Basic Information - Hakki Pilke Raven 33 Manual

1 General information

1.1

INTRODUCTION

The purpose of this manual is to ensure that the machine is used in the manner intended by the manufacturer,
taking safety into consideration. Everyone operating the machine or working in close proximity to it must study
this manual carefully.
Operators of the machine are expected to have basic skills in tractor handling, such as utilising the cardan shaft
drive and the tractor's lifting equipment. Before commencing work, operators must also familiarise themselves
with the machine's control and safety equipment, and ensure their proper operation.
Additional information on Maaselän Kone Oy's products is available on our website at www.hakkipilke.fi.
Keep this manual in the immediate vicinity of the machine.
1.2

PURPOSE OF USE

The Hakki Pilke Raven 33 firewood processor is designed for preparing firewood from pruned wood or logs. The
firewood processor must not be used to process any treated wood, such as is found in construction waste. Sand,
nails or other impurities in the wood may damage the machine.
The maximum diameter of the logs to be processed is 33 cm. This limit must not be exceeded. When estimating
the diameter of the log you are about to cut, note that the shape of the log and other factors, such as branches
and burrs, make the actual diameter larger, and may prevent the log from being fed to the machine. The machine
is intended to be used mainly for logs less than 30 cm in diameter. However, logs with a diameter of up to 33 cm
can be split temporarily by lowering the splitting blade to the lower position. Do not split logs that exceed 50 cm
in length.
1.3

MACHINE MODELS AND BASIC INFORMATION

Model
Driving power
Weight
TR/Electrical drive
Height/width/length
in transport position
In-feed/out-feed conveyor
Saw bar/chain
Max log diameter
Max/min log length
HAKKI PILKE RAVEN 33
PTO
Tractor's cardan shaft
(PTO)
730 kg
min 20 hp / max 410 rpm
Transport position 251/136/262 (cm)
220/400 (cm)
bar: 15" groove 1.5 mm chain: 66 loops, pitch 0.325"
33 cm
Log max 50 cm; min 17 cm
TRANSLATION
4
Electrical
Electric motor
750 kg
7.5 kW (min 20 A type C fuse)
VERSION 1