Hakki Pilke Raven 33 Manual page 11

Placing the out-feed conveyor in the operating or transport position
Place the out-feed conveyor in the operating position as follows:
5. Ensure that there is sufficient room
for opening the out-feed conveyor.
6. Turn off the machine and disconnect
it from the power source.
7. Keep lock A (Figure 5) open and
lower the out-feed conveyor using a
winch to its lowest position.
8. Turn the upper section of the con-
veyor into the operating position us-
ing handle B (Figure 6).
9. Turn transport position support bar
C on the out-feed conveyor belt
(Figure 7) to the side.
HAKKI PILKE RAVEN 33
11
TRANSLATION
Figure 5.
Figure 6.
Figure 7.
VERSION 1