Riello Condexa PRO Series Installation, Technical And Maintenance Manual page 18

INSTALLATION
After installing the thermal module:
− remove the locking screw.
− pull the front panel outwards and then to the top to de-
couple it from points A.
− remove the polystyrene block (B) under heat exchanger
(only for models Condexa PRO 90 - Condexa PRO 100 -
|e|null - Condexa PRO 135).
A
A
B
Locate the envelope containing the product documentation and
stick the Energy Efficiency Label (if any) contained in the enve-
lope onto the panel.
30 mm
25 mm
Close the panelling in reverse order to the one described above.
9
Before proceeding with the hydraulic connections the pro-
tection plugs must be removed from the delivery, return
and condensate drain piping.
18