Date And Time (Cmd 45); Change Passcode (Cmd 55); Figure 5: Date And Time Format - Bosch D623 Series User Manual

D623 Series/D625 Series | User's Guide | Date and Time (Cmd 45)

Date and Time (Cmd 45)

I can perform this command.
I cannot perform this command.
Use this command to program the system date and
time.
1. Ensure that the system is turned off (On indicator
is off).
2. Press [CMD] [4] [5]. The keypad may prompt you
to enter a valid passcode.
3. Enter your passcode if necessary. The keypad
displays.
Please Enter
Date and Time
MM/DD/YY HH:MM
01/01/01 00:01
4. Enter the date and time using the numeric keys in
MM/DD/YY, HH:MM format.

Figure 5: Date and Time format

___ ___ / ___ __ _ / ___
M M D D Y
1 2
1 - Month of the year
2 - Day of the month
3 - Current year
4 - Hour of the day
5 - Minute of the hour
5. The keypad displays both the date and time you
entered before returning the keypad to the normal
display. In this example, the keypad displays.
Current Date
04/16/01
Current Time
13:35
The keypad returns to the normal display.
In the event of a power cycle (power is
lost to the system and then restored), the
control panel takes the last event in the
log and uses that as a starting point for
the time and date. It then alerts you to
enter the current time and date.
16
___ ___ ___ : ___
Y H H M
3 4 5

Change Passcode (Cmd 55)

I can perform this command.
I cannot perform this command.
Use this command to change your passcode at any
time. However, only use this feature under the
direction of your security company. The system
must be off in order to use this command.
Write down your new and old passcode before you
begin.
1. Ensure that the system is turned off (On indicator
is off).
2. Press [CMD] [5] [5]. The OK tone sounds and the
keypad displays:
Please enter
old code
3. Enter your current passcode. As you enter your
passcode, the keypad displays:
Entering Code
***
4. If the passcode you have entered is valid, you are
___
prompted to enter your new passcode:
M
Please enter
new code
5. Enter a new passcode with the same number of
digits as your old passcode. If the error tone
sounds, try a different new passcode. As you enter
your new passcode, the keypad displays:
Entering Code
***
6. If you have entered a valid new passcode, the
keypad prompts you to enter the new passcode
again:
Please enter
new code again
7. Enter your new passcode again. As you enter your
new passcode, the keypad displays:
Entering Code
***
8. The keypad displays the following to confirm you
have successfully changed your passcode:
Code changed
The keypad returns to the normal display.
Bosch Security Systems | 9/04 | 46841E