Using The Wireless Keyfob; Disarming After An Alarm; Using A Pin Code Or Proximity Tag - Pyronix ENFORCER V11 Extended User Manual

USING THE WIRELESS KEYFOB

To disarm via a keyfob. Press .
The keyfob LED will flash green indicating that the system has disarmed.
Please note: Disarming with a keyfob will only be allowed if your
engineer has enabled this.

DISARMING AFTER AN ALARM

USING A PIN CODE OR PROXIMITY TAG

Enter a valid PIN code or present a valid tag to the symbol as
shown.
The alarm symbol will flash indicating there has been an alarm
activation and the keypad will display which zone has activated.
Press h to reset the system.
USING THE WIRELESS KEYFOB
To disarm via a keyfob. Press .
The keyfob LED will start to flash green indicating that the system has
disarmed.
Rearming the system after an alarm can only be done at the keypad.
Please note: Disarming with a keyfob will only be allowed if your
engineer has enabled this.
10
ENFORCER V11 EXTENDED USER GUIDE
<2 seconds
Enter Your Code
[******]
Alarm Silenced
Lounge
Alarm Panel
Time 10:09 c
<2 seconds