Set Up App Data - Pyronix ENFORCER V11 Extended User Manual

SET UP APP DATA

This menu is required in order to use the smart device application to control the system. When setting this menu
up it is important to take note of the 'System ID' , 'App Password' and 'Cloud Password' .
SET UP APP DATA?
Press b or h to scroll to 'SET UP APP DATA?' .
Press f.
Press [ or ] to enable or disable using HomeControl2.0.
Press f.
Take note of the System ID. This will be needed for the
App setup. Press f.
HomeControl2.0
Your engineer should have already set up the PyronixCloud and
a password. Press f.
At this point you choose 'normal' security level or 'high' security level. This does not compromise the
security between the control panel and
generate a 32 digit app password for you.
Low Security
Press d to select 'Normal' . Press f.
Create an App Password. This is entered on
when connecting to the system. Press f.
20
HomeControl2.0 but if high is selected, the panel will automatically
HomeControl2.0
ENFORCER V11 EXTENDED USER GUIDE
SET UP APP
DATA?
Use App?
Yes [1]
System ID
AABBC7DD
Cloud Password
_
Security Level
Normal [0]
App Password
_