Table of Contents
Advertisement
2.6
HDMI Connector
The UNO-3483G provides an HDMI and VGA controller for a high resolution inter-
face. It supports up to full HD resolution for two independent displays.
2.7
RTC Battery
The RTC Battery to ensure the setting in BIOS and system clock can be kept, even
with power disconnected for a short time.
Type: BR2032 (Using CR2032 is NOT recommended)
Output Voltage: 3 VDC
Location: front side removable cover named RTC BTR
2.8
Power Button/Power Management
Press the "PWR" button to power on or power off (ATX type). This product supports
the ACPI (Advanced Configuration and Power Interface). As well as power on/off, it
supports multiple suspend modes, such as Power on Suspend (S1), Suspend to
RAM (S3), and Suspend to Disk (S4).
2.8.1
Power mode switch
User can set AT/ATX mode in BIOS setup menu "Chipset\Restore AC power loss".
[Power ON]: AT mode
[Power OFF]: ATX mode
2.9
Reset Button
Press the "Reset" button to activate the hardware reset function.
UNO-3483G User Manual
Figure 2.9 AT/ATX adjustment
12
Advertisement
Table of Contents
